Silverlit FXX Operations Instructions download pdf

EI-3347

Instruction Manual

Battery requirement for (Transmitter):

Power Supply :

Rating : DC 9 V, 0.135 W

Battery : 1 x 9 V 6F22/6LR61 (included)

Capacity : 450 mAh

Battery requirement for (Vehicle):

Power Supply :

Rating : DC 6 V , 7,8 W

Batteries : 4 x 1,5 V “AA”/LR6/AM3 (included)

Capacity : 2800 mAh

Delivery contents

Battery warnings:

Care and Maintenance:

Notes:

Silverlit SAS, Espace Green Parc, Route de Villepecle, 91280 Saint Pierre du Perray / France.

Safety precautions

- Parents: Please read the operating instructions carefully with your children prior to the first use.

- Stop the vehicle through the transmitter before picking it up.

- Keep hands, hair and loose clothing away from the moving parts, e.g. tires and the wheel hubs, when toy is switched on.

- Do not operate the remote controlled vehicle on streets. Avoid hitting people, pets or home furnishings.

Transmitter

Part Identification

- The vehicle is powered by 4 x 1.5V “AA” size batteries.

- The transmitter is powered by one 9V battery.

Battery Installation: Transmitter

Battery Installation: Vehicle

Getting Started

Batteries

ENGLISHENGLISH

ENGLISH

2 3

Steering:

Forward and accelerate

Forward left

Forward right

Backward and accelerate

Backward left

Backward right

MovementThrottle stick Direction stick

Power Switch

Band Selector

Driving Tips:

Troubleshooting

Symptom Cause Solution

Driving the remote controlled vehicle

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1)This device may not cause harmful interference, and

2)This device must accept any interference received, including interference that may cause undesired operation.

FCC Statements

1. Extend the antenna on transmitter.

2. Set transmitter power switch to “ON”, the power indicator will light up.

3. Set vehicle power switch to “ON”.

4. Set transmitter and vehicle to the same band.

5. Steer the vehicle by adjusting the throttle stick and steering stick of transmitter

in different combinations to perform different action.

6. Press the light button on transmitter to trigger the lighting.

7. Turn the steering axle adjuster at the bottom towards “L” when the vehicle drives to the right involuntarily.

If it turns left involuntarily, turn the adjuster towards “R”. (fig. 5)

- Parental guidance is recommended when installing or replacing batteries.

- Keep this instruction manual for future reference.

- Users should keep strict accordance with the instruction manual while operation the product.

- Under the environment with electrostatic discharge, the toy may malfunction and require user to reset the toy.

- Use new alkaline batteries in this toy to obtain best performance.

- Always remove batteries from the toy when it is not being used for a long period of time.

- Wipe the toy gently with a clean cloth.

- Keep the toy away from direct heat.

- Do not submerge the toy into water that can damage the electronic assemblies.

Warning: Conversion or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the

product.

- Non-rechargeable batteries are not to be recharged.

- Rechargeable batteries are to be removed before being recharged.

- Rechargeable batteries are only to be charged under adult supervision.

- Different types of batteries or new and used batteries are not to be mixed.

- Only batteries of the same or equivalent type as recommended are to be used.

- Batteries are to be inserted with correct polarity.

- Exhausted batteries are to be removed from the toy.

- The supply terminals are not to be short-circuited.

- Do not mix old and new batteries.

- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

WARNING:

CHOKING HAZARD

Small Parts.

Not for children under 3 years.

The crossed-out dustbin symbol indicates that batteries,

rechargeable batteries, button cells, battery packs, etc. must

not be put in the household waste. Batteries are harmful to

health and the environment. Please help to protect the

environment from health risks. Tell your children to dispose of

batteries properly by taking them to the local collecting points.

This way batteries are recycled safely.

Waste Electrical and Electronic Equipment

(WEEE)

When this appliance is out of use, please remove all batteries and

dispose of them separately. Bring electrical appliances to the local

collecting points for waste electrical and electronic equipment. Other

components can be disposed of in domestic refuse.

For Ages 5+

Ab 5 Jahre

Pour 5 ans et plus

Voor leeftijd 5+

Para 5+ años

Dai 5 anni in su

This product is in

compliance with the

essential requirements

and other relevant

provisions of Directive

1999/5/EC.

1. The speed varies at different throttle stick positions.

2. The turning speed and radius may vary at different lever position combinations.

3. Do not touch or hold the antenna of transmitter.

4. Only operate the vehicle on flat, smooth (but not slippery) and dry surfaces or low pile carpets. Hair,

carpet or dirt can affect the operation of the vehicle.

5. For best performance, hold the antenna up, do not point it down towards the vehicle.

6. Do not drive the vehicle on sand or through water or snow. If your vehicle gets wet, wipe it with a towel

and allow it to dry completely.

7. When the vehicle runs erratically, the problem is usually the result of interference caused by high

tension wires, radios or other remote controlled toys running close by on the same frequency as yours.

You may have to choose an alternate place to driv

8. Do not operate near concrete walls which may disturb radio signal transmission

- Race against other vehicles using different

frequencies or channel.

- Move to another place where without radio

frequency interference from other devices.

- Ensure the antenna is fully extended. The vehicle

has a transmission range of 20 meters (65 feet) in

open space.

- Change another environment to avoid direct light.

- Avoid these if possible, or choose another place to

operate the vehicle.

- Select the correct frequency band.

- Change new battery in transmitter.

- Switch off the toy and turn it on again.

- Power switch is not in “ON” position.

- Batteries are not installed correctly.

- Weak batteries.

- Hair, carpet or dirt might be trapped between

wheels.

- Another radio control vehicle using the same

frequency and channel is operated near your

vehicle.

- Out of the transmission range.

- Affected by strong lights.

- High-frequency interference occurred near to

high-voltage lines, transformers and some

types of building.

- Band selection is not correct.

- The transmitter batteries are weak.

- The toy is in stand-by mode

- Switch on the power.

- Check the batteries polarity and connection.

- Replace them with new ones.

- Carefully remove the foreign materials.

Direction

stick

Throttle

stick

Vehicle runs slowly,

erratically or does not run..

Vehicle does not react, or react

poorly to the transmitter.

Loss of control.

Make sure the power switch is on “OFF” position.

1. Pull out the battery compartment cover. (fig. 1)

2. Insert one 9V battery with correct polarity, as shown inside battery compartment (fig. 2).

3. Close the battery compartment cover.

Make sure the power switch is on “OFF” position.

1. Press down the button (1) on battery compartment cover, and then follow the arrow (2) direction to push

out the battery compartment cover (fig. 3).

2. Insert four “AA” batteries with correct polarity, as shown inside battery compartment (fig. 4).

3. Close the battery compartment cover.

Power indicator

Light button

Power switch

Screw the antenna

into the transmitter

Band selector

Power switchBand selector

Battery Compartment Cover (Vehicle)

OFF ON

A B C

R L

fig. 5

TIPS

For the vehicle, best &

maximum performance can

be only obtained by new

and alkaline batteries.

TransmitterVehicle

- 1:16 Ferrari FXX Vehicle

- Transmitter

- 4 x “AA” size alkaline batteries

- 9 V battery

- Instructions manual

1:16 Ferrari FXX

"Produced under license of Ferrari Spa. FERRARI, the PRANCING HORSE device, all associated logos and distinctive designs are property of Ferrari

Spa. The body designs of the Ferrari cars are protected as Ferrari property under design, trademark and trade dress regulations"

fig. 4

fig. 3

Battery Compartment

Cover (Transmitter)

fig. 1

fig. 2

WARNING: 1

Summary of Contents

Page 1 - WARNING:

EI-3347Instruction ManualBattery requirement for (Transmitter):Power Supply : Rating : DC 9 V, 0.135 WBattery : 1 x 9 V 6F2

Comments to this Manuals

No comments

Silverlit FXX Operations Instructions

Browse online or download Operations Instructions for Remote controlled toys Silverlit FXX. Silverlit FXX User Manual

Summary of Contents

Comments to this Manuals